18
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
●
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
●
Battery charger problems may trigger a protective circuit that
stops charging and makes the charge lamp blink in orange. If this
happens, disconnect the charger’s power plug from the power
outlet and remove the battery pack. Attach the battery pack to the
charger again and wait a while before connecting the charger to a
power outlet again.
●
For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
●
For details on charging time, see “Battery Charger LC-E12/LC-
E12E” (
190), and for the number of shots and recording time
possible with a fully charged battery pack, see “Power Supplies”
(
●
Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
●
As a visual reminder of the charge status, attach the battery cover
with visible on a charged battery pack and concealed on an
uncharged one.
●
The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
●
Remove the cover from the battery pack,
align the marks on the battery pack
and charger, and insert the battery pack
by pushing it in (1) and down (2).
2
Charge the battery pack.
●
LC-E12: Flip out the plug (1) and plug the
charger into a power outlet (2).
●
LC-E12E: Plug the power cord into the
charger, then plug the other end into a
power outlet.
●
The charging lamp turns orange, and
charging begins.
●
When charging is finished, the lamp turns
green.
3
Remove the battery pack.
●
After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
LC-E12
LC-E12E