Canon EOS 5D MARK IV, Инструкция по эксплуатации

Страница: 658 / 676

W-44
This section explains how to connect the camera and Connect Station
(sold separately) wirelessly. To save images in other ways, refer to the
Connect Station Instruction Manual.

Set up the camera to allow use of its NFC function in advance
(p.W-16).
1
Enable the NFC function on the
camera
(p.W-16)
.
2
Hold the camera close to Connect
Station.

Turn on the camera and Connect
Station, then hold the camera’s
P
mark close to the Connect Station’s
NFC connect point.
 When a message indicating the
connection is being established is
displayed on the camera’s LCD
monitor and Connect Station
responds, move the camera away
from Connect Station.

When a connection is established,
Connect Station checks the images
on the memory card, then saves only
the unsaved images.
3
Terminate the connection.

After images are saved, the screen
on the left will appear on the camera’s
LCD monitor. Press <
0
> to
terminate the connection.
Saving Images
NFC connect point