Canon EOS 5D MARK IV, Инструкция по эксплуатации

Страница: 504 / 676

7
Custom Controls
N
502
Only while you hold down the depth-of-field preview button or the lens’s
AF stop button, you can apply AF with the following settings: AF area
selection mode (p.104), Tracking sensitivity (p.132), Acceleration/
deceleration tracking (p.133), AF point auto switching (p.134), Servo 1st
image priority (p.136), and Servo 2nd image priority (p.137). Useful
when you want to change the AF characteristics during AI Servo AF.
*2: On the setting screen, press the <
B
> button to
display the detailed settings screen. Turn the
<
5
> or <
6
> dial to select the function to be
registered, then press <
0
> to add a checkmark
[ X ]. When you select a function and press <
0
>,
you can adjust the setting. By pressing the <
L
>
button, you can revert the settings to their defaults.
You can switch the AF operation. In One-Shot AF mode, when you
press the button to which this function is assigned, the camera switches
to AI Servo AF/Servo AF mode. If you press the button in the AI Servo
AF/Servo AF mode, the camera switches to One-Shot AF mode. Useful
when you need to keep switching between One-Shot AF and AI Servo
AF/Servo AF for a subject that keeps moving and stopping.
*3: On the setting screen, when you press the <
B
> button, you can select [ Switch
only when btn is held ] or [ Switch each time btn is pressed ].
: Switch to registered AF function
: ONE SHOT z AI SERVO/SERVO
This function does not work during Live View shooting if Multi Shot Noise
Reduction is set.