Canon EOS 5D MARK IV, Инструкция по эксплуатации

Страница: 247 / 676

245
d
: Program AE
If the “ 30 "” shutter speed and the lowest f/number
blink, it indicates underexposure.
Increase the ISO speed or use flash.
If the “ 8000 ” shutter speed and the highest f/number
blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering the
lens.
Differences Between <
d
> and <
A
> Modes
In the <
A
> mode, many functions, such as the AF operation and metering
mode, are set automatically to prevent spoiled shots. The functions you can
set are limited. With <
d
> mode, only the shutter speed and aperture are set
automatically. You can freely set the AF operation, metering mode, and
other functions (p.536).
Program Shift
In the Program AE mode, you can freely change the shutter speed and
aperture combination (Program) set automatically by the camera while
maintaining the same exposure. This is called Program shift.
To shift the program, press the shutter button halfway, then turn the
<
6
> dial until the desired shutter speed or aperture is displayed.
Program shift will be canceled automatically when the metering timer
(
0
) ends (exposure setting display turns off).
Program shift cannot be used with flash.