Canon EOS 5D MARK IV, Инструкция по эксплуатации

Страница: 505 / 676

503
7
Custom Controls
N
While the metering timer is active, when you press the depth-of-field
preview button or the lens’s AF stop button, the focusing point can be
switched to the registered AF point.
*4: On the setting screen, when you press the <
B
> button, you can select [ Switch
only when btn is held ] or [ Switch each time btn is pressed ]. To register the AF
point, see page 500.
While the metering timer is active, pressing the <
p
> (AF area
selection) button will switch between the current AF point and the center
AF point or registered AF point.
*5: On the setting screen, when you press the <
B
> button, you can select [ Switch
to center AF point ] or [ Switch to registered AF point ]. To register the AF point,
see page 500.
While the metering timer is active, you can select an AF point directly
with the <
5
> or <
9
> dial without pressing the <
S
> button.
*6: With the Quick Control Dial setting screen
displayed, you can press the <
B
> button, then
set the direction for switching the AF point for
when the <
5
> dial is turned. The [ Direction: AF
point switching ] settings for [ Horizontal ] and
[ Vertical ] will work for Single-point Spot AF,
Single-point AF, Man. select.
c
: AF point
expansion, and Expand AF area: Surround. The
[
Direction: Zone AF frame switch ] settings for
[ Cycle through the zones ], [ Horizontal ], and [ Vertical ] will work with Zone AF.
*7: On the Multi-controller setting screen, you can press the <
B
> button and select
the AF point ([ Switch to center AF point ] or [ Switch to registered AF point ]) the
camera switches to when you press the center of <
9
>. To register the AF point, see
page 500.
: Switch to registered AF point
: Selected AF point z Center/Registered AF point
:Direct AF point selection
If you assign [ Direct AF point selection ] to <
5
> and you want to change
the aperture in the <
a
> mode, hold down the <
A
> button and turn the
<
6
> dial.