Canon EOS 5D MARK IV, Инструкция по эксплуатации

Страница: 264 / 676

F
: Long (Bulb) Exposures
262
3
Set the desired exposure time.
Select the hour, minute, or second.
Press <
0
> so <
r
> is displayed.
Set the desired number, then press
<
0
> (Returns to <
s
>).
4
Select [OK].
X
The set time will be displayed on the
menu screen.
X
When you exit the menu, <
H
>
will be displayed on the LCD panel.
5
Take the picture.
X
Press the shutter button completely,
and the bulb exposure will start and
continue until the set time elapses.
During bulb timer shooting, <
H
>
will blink.
To cancel the timer setting, set
[
Disable ] in step 2.
Bulb timer
Elapsed exposure time
While the bulb timer is operating, if you press the shutter button
completely and release it, the bulb exposure will stop.
If you keep pressing the shutter button completely after the exposure
starts, the bulb exposure will continue even after the set exposure time
elapses. (The bulb exposure will not stop automatically when the set
exposure time elapses.)
Doing any of the following will cancel the bulb timer (reverts to
[
Disable ]): Set the power switch to <
2
>, replace the battery, replace
the card, switch to movie shooting, or change the shooting mode to other
than <
F
>.