427
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
*
If the error message still appears after following the above instructions,
write down the error code number and contact your nearest Canon Service
Center
.
Error Codes
Number
Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
Î
Clean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery again (p.27, 48, 38).
02
Card cannot be accessed. Reinsert/change card or format card
with the camera.
Î
Remove and insert the card again, replace the card, or format the
card (p.38, 68).
04
Cannot save images because card is full. Replace card.
Î
Replace the card, erase unnecessary images, or format the card
(p.38, 339, 68).
05
The built-in flash could not be raised. Turn the camera off and on
again.
Î
Operate the power switch (p.42).
06
Sensor cleaning could not be performed. Turn the camera off and
on again.
Î
Operate the power switch (p.42).
10, 20
30, 40
50, 60
70, 80
99
An error prevented shooting. Turn the camera off and on again or
re-install the battery.
Î
Operate the power switch, remove and install the battery again, or
use a Canon lens (p.42, 38, 48).
Error number
Cause and countermeasures
