383
Remote Control Shooting
5
Select [Pairing].
Select [
Pairing
], then press <
0
>.
Press and hold the <
W
> button and
<
T
> button simultaneously for 3 sec.
or more.
X
Pairing starts. After the pairing is
complete, the BR-E1 is registered to
the camera.
6
Enable remote control shooting.
Set [
z
1: Drive mode
] to [
Q
].
Set [
z
5: Remote control
] to
[
Enable
].
Still Photo Shooting
Movie Shooting
Even when the camera’s power is turned off by its auto power off function,
the camera battery will still be consumed with the Bluetooth connection
established.
When you do not use Bluetooth function, setting it to [
Disable
] in step 4
is recommended. To use the remote controller again, just select
[
Remote
] again.
If remote control shooting is enabled, the auto power off will take effect in
approx. 2 min. even if [
5
2: Auto power off
] is set to [
1 min.
].
For the Bluetooth connection indicator, refer to the Wi-Fi (Wireless
Communication) Function Instruction Manual.
For operation of BR-E1, refer to the BR-E1 Instruction Manual.
