Handy Features
288
You can change how long the image is displayed on the LCD monitor
immediately after shooting. If [
Off
] is set, the image will not be displayed
immediately after shooting. If [
Hold
] is set, the image review will be
displayed up until the [
Auto power off
] time has elapsed.
Note that during image review, if you operate any camera controls such
as pressing the shutter button halfway, the image review will end.
Under the [
z
1
] tab, select [
Image
review
], then press <
0
>. Select the
desired setting, then press <
0
>.
To save battery power, the camera turns off automatically after a set time
of idle operation elapses. When the camera is turned off due to auto
power off, you can turn it on again by pressing the shutter button, etc.
If [Disable] is set, either turn off the camera or press the <
U
>
button to turn off the LCD monitor to save battery power.
Even if [Disable] is set, the LCD monitor will turn off after the
camera is left idle for approx. 30 min. To turn on the LCD monitor
again, press the <
U
> button.
Under the [
5
2
] tab, select [
Auto power
off
], then press <
0
>. Select the
desired setting, then press <
0
>.
3
Setting the Image Review Time
3
Setting the Auto Power Off Time
If [
10 sec/30 sec
] is set, the camera will turn off after it is left idle for approx.
10 sec. When setting functions or during Live View shooting, movie
shooting, image playback, etc., the auto power off time will be approx. 30
sec.
