3-13
Chapter 3 Basic Operation
■
Setting the Events Function
The Job function will not function unless [DR7090C Job
Tool] is specified for the scanner’s Events function in
Windows. Before using the Job function, perform the
following procedure to configure the scanner’s event
settings.
1.
Click the [Start] button, then select [Settings] -
[Control Panel].
2.
Double-click [Scanners and Cameras].
The Scanners and Cameras dialog box appears.
Hint
The dialog box that appears may vary depending on the
Windows version you are using.
3.
Select [Canon DR-7090C] and click [Properties].
4.
Click the [Events] tab.
