Chapter 4
4-19
No display
#834
MDN error notification
received. The MDN error
notification is sent to the
transmission source as a
transmission result in the mail
header when the final processing
of a mail sent in I-Fax Full mode
fails in the iR reception
machine.
- Programme the transmission other party
conditions so that they can be processed by
the receiver.
- Check that the receiver memory is not full.
- Correct the cause of reception image
decoding failure.
SMTP server
authentication error
#839
Error occurred with password,
user name and/or account when
attempting SMTP AUTH
transmission.
- Check SMTP authentication user name,
password.
- Check SMTP server account.
SSL error(SMTP
Send)
#841
Because there is no encoding
algorithm in common with the
mail server, error occurred when
attempting SSL encoded
transmission.
- Stop SSL encoded transmission.
- Change mail server settings and add
encoding algorithm.
SSL error(SMTP
Send)
#842
The mail server has requested
client authentication, which is an
unsupported function, and an
error was generated when SSL
transmission was attempted.
- Change the mail server settings so that
client authentication is not requested.
- Stop using SSL encoded transmissions.
SMTP
authentication error
#843
In SMTP authentication using
GSSAPI, there is a significant
difference (more than 5 minutes)
in the time set in the KDC (Key
DistributionCenter) server and
that set in the iR, causing SMTP
authentication, using GSSAPI,
to fail.
- Correct the time settings on the machine.
- Check the time zone and summer time
settings.
- Correct the KDC server time settings.
SSL error(POP)
#844
In a transmission using POP
Before SMTP, the device
attempted SSL encryption
communications but an error
occurred in the communications
and failed in POP
authentication.
- Check the settings for encrypted SSL
communications in the POP server.
- Turn Allow SSL (POP) option off in
Additional Functions not to use SSL
encryption function for communications
with the POP server. - Turn POP
Authentication before Sending option off not
to use POP Before SMTP.
POP AUTH
encryption error
#845
In an email or I-Fax
transmission using POP Before
SMTP, the device attempted
POP Auth but an error occurred
in the POP server and failed in
POP authentication.
- Check POP Address and POP Password
settings of Additional Functions.
- Check the POP authentication settings in
the POP server.
- Cancel the selection of POP AUTH for
POP AUTH Method.
- Turn POP Authentication before Sending
option off not to use POP Before SMTP.
APOP encryption
error
#846
In an email or I-Fax
transmission using POP Before
SMTP, the device attempted
APOP of POP authentication but
an error occurred in the APOP
authentication and failed in POP
authentication.
- Check POP Address and POP Password
settings of Additional Functions.
- Check the APOP settings in the POP server.
- Cancel the selection of APOP for POP
AUTH Method.
- Turn POP Authentication before Sending
option off not to use POP Before SMTP.
No display
#899
Operation completed normally. This error code indicates that transmission as
far as the SMTP server was completed
normally, but delivery cannot be confirmed.
Except when delivery confirmation is
performed in I-Fax Full mode, confirmation
is displayed on the I-Fax/E-Mail
transmission side. The only way to judge
whether transmission has been completed
normally is to see whether there has been an
error mail reception printout.
Archive log is full
#856
In the case of using job archive
function, the disk of the archive
storage is full, causing the send/
receive job error.
Retrieve the archive log to the server.
Check to see if the
address is correct.
#762
e-mail is sent to an address for
which transmission is not
permitted.
Check to see if the target of transmission is
correct.
Check to see if the domain (in user mode) is
one for which transmission is permitted.
Do not transmit to an address for which
transmission has not been authorized..
Message
Error code Cause
Remedy
Содержание Color Universal Send Kit-Q1
