Canon Color Universal Send Kit-Q1, Руководство по обслуживанию

Страница: 86 / 96

Chapter 4
4-24
4.3.7 NCP Transmission errors
0020-7990
<NCP transmission error message and error code list>
T-4-9
e-Signature
Certificate Access
Error #761 The encryption code used at time of PDF transmission (bearing
a user signature prepared by MEAP authentication) prevents
transmission. Install the appropriate user certificate or machine certificate
properly.
Check to see if the
address is correct. #762 e-mail is sent to an address for which transmission is not
permitted. Check to see if the target of transmission is correct.
Check to see if the domain (in user mode) is one for which
transmission is permitted.
Do not transmit to an address for which transmission has not been
authorized..
e-Certificate
Validity error #762 The period of validity of the certificate used for signature
transmission has passed. Use a certificate whose period of validity is still good.
If necessary, set the time correctly.
e-Certificate
Validity error #766 The period of validity of the certificate used for signature
transmission has passed. Use a certificate whose period of validity is still good.
If necessary, set the time correctly.
Check server #801 - Error generated due to cause on server side.
- In NetWare,a user exists but no read or write privileges.
- Transmission made to write-prohibited file of the same name. - Reset server.
- Check server status and settings.
- Check the network traffic.
Cannot find server #802 - The IP address for DNS server is not set up.
- DNS Server is not running.
- No appropriate host name is found in the DNS server. - Check the DNS server.
Check address #804 - No match for specified directory name.
- No access privileges for that directory. - Check that the destination directory name is correct.
- Set directory access privileges in the server.
- Send to different directory with access privileges.
Disk full on the
Server #805 -Document deletion of server
Check address. #806 - Wrongly specified user name.
- Wrongly specified password.
- In NetWare, the host name is incorrect. - Change address book user name or password.
No message #807 No access rights for the specified directory - Check the access rights to the server.
It is generated the
error by the cause
of the servers end. #808 -The server is reset.
No connection #815 - Login is made from this unit in NetWare's Pserver mode
(NDS/ Bindery common) and login is attempted again for
NCP, while the server is printing. - Wait a while and try again.
- Change the destination NetWare server.
- Stop Pserver.
Message Error code Cause Remedy
No message #022 Address deleted or invalidated during
transmission reservation. - Retransmit deleted address.
- Check that a group address is specified as the transfer destination and that it
contains a valid address.
- Check that a group address is specified as the transfer destination and whether
it contains local print or fax box only.
- Check whether the specified transfer destination address has been deleted.
Transmission
cancelled #099/ #995 - Transmission cancelled by user. Resend.
Message Error
code Cause Remedy