Canon CLC5151, Копирование и руководство почтового ящика

Страница: 44 / 468

Reserved Copying 1-24
1
Introdu
ction to
th
e C
o
p
y
Func
tions
●
If you want to select a nonstandard paper size:
❑
Press [Irreg. Size].
❑
Press [X] (horizontal axis)
➞
enter a value.
❑
Press [Y] (vertical axis)
➞
enter a value.
❑
Press [OK].
You can also press a size key in which a paper size is registered ([S1] to [S5]), instead of
entering a value.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a paper size in that
key beforehand. For instructions on registering a paper size, see Chapter 4, "Customizing
Settings," in the Reference Guide.
❑
Press [Next].
❑
Select the desired paper type
➞
press [OK].
If you are copying onto the back side of a previously printed sheet, press [2nd Side of
2-Sided Page].
●
If you want to select an envelope size:
❑
Press [Envelope].
❑
Select the desired envelope type
➞
press [OK].
IMPORTANT
•
If the envelope type is not set correctly, a paper jam will occur.
•
Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat
and pressure of the fixing unit.
❑
Press [OK].
The paper size/type currently loaded and the paper size/type reserved to be loaded are
displayed, as shown on the screen below.
The last paper size/type specified
for the reserved copy job
The paper size/type currently
loaded