![background image](http://html.mh-extra.com/html/canon/canoscan-2700f/canoscan-2700f_getting-started_62739049.webp)
49
Cause 5:
The ASPI driver software has not been installed.
Solution:
Install the ASPI driver software.
Cause 6:
The scanner’s power switch was in the off position when Windows 95 was booted.
Solution:
Start your computer after you have switched on your Film Scanner.
The Driver Software Will Not Start
Cause 1:
The scanner power switch is off.
Solution:
Restart your computer after first turning on the Film Scanner power switch.
Cause 2:
The driver has not been installed correctly.
Solution:
Reinstall the driver software included in your Film Scanner being sure to follow the correct proce-
dures.
The Scanned Image is Reversed Left to Right or Top to Bottom
Cause:
The film has been inserted in a reversed state.
Solution:
Position and insert the film with the correct orientation.
Irregularities or Lines Appear in the Same Place
Cause 1:
There is dirt or dust on the film.
Solution:
Remove the dirt from the film with a blower brush or other device.
Cause 2:
The film is damaged.
Solution:
Use a film that is not damaged.
The Image is Blurry
Cause 1:
The manual focus setting was incorrect.
Solution:
Set the manual focus to the correct setting or scan the image with auto focus.
( -> See the soft-
ware Users Guide )
Cause 2:
The focus was incorrectly set when the film was shot.
Solution:
The film cannot be used.