manualshive.com logo in svg

Canon CanoScan 2700F, Начало работы

Поделиться
Скачать
Canon CanoScan 2700F Скачать руководство пользователя страница 17

17

3. Installing the ASPI Driver Software

Once you have installed the SCSI host adapter card into your computer, you must install driver software to
operate the card. The Windows 95 program will prompt you to install the SCSI host adapter card driver software
that accompanied your computer. However, a newer driver has been provided with your SCSI host adapter card.
First install the Windows 95 driver as prompted and then install the new version, the ASPI driver.

CAUTION:

• Install the driver software as described below before installing ScanCraft FS or other application soft-

ware included in your Film Scanner.

 Turn the computer power switch to the On position.

After a moment the [New Hardware Found] dialog box will appear and a message will prompt you to
insert the Windows 95 system disk into the computer.

CAUTION:

• If you are replacing a previously installed SCSI host adapter card with this card, the [New Hardware

Found] dialog box may not appear. In this event, start at procedure 3 below and follow the instructions
to switch drivers.

 Insert the Windows 95 system disk or CD-ROM into the floppy drive or CD-ROM

tray as appropriate and click the [OK] button.

If the system is provided on floppy disks, insert the disk labeled with the number specified in the  dialog
box.

The required driver will install automatically and start the Windows 95 program.

CAUTION:

• Once the Windows 95 program has started, continue with the procedures on the next page to

change the driver.

• If another scanner is already connected to your SCSI host adapter card, an Install Driver dialog

box will appear after the procedures outlined above. Select the [Select from a list of alternate
drivers] option and then choose the [Unsupported Device] option from the next dialog.

• In the new version of windows 95, the [Update Device Driver Wizard] dialog box appears when

windows 95 is started.  In the first dialog box, click the [Next] button without inserting anything into
the disk drive.  In the next dialog box, click the [Finish] button and start windows 95.

Содержание CanoScan 2700F





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды