Canon BJ-W3000, Руководство по обслуживанию

Страница: 33 / 268

CHAPTER 1. GENERAL DESCRIPTION
1–20
[11] Plot layout
Printed data layout can be set.
a. Auto Layout (roll media only)
[Default: Off]
Automatic layout can be set. The data
size at this time should match the data size of
"6. Image layout" (p.1-27).
• Off
Automatic layout does not take place.
Data is printed in the layout designated
by the received data. However, the
settings designated by the scale, rota-
tion, and Y-mirror menus will be used.
• Nesting
Nesting is automatically laid out.
Continuous data is rotated clockwise so
that the paper feeding rate is minimized.
If the longitudinal direction of the later
data enters in the width direction of the
margin of the previous data, the data is
printed on the margin. If the later data
does not fit into the width of the margin
of the previous data, the data is not
printed on the margin but printed to the
next printing position.
• Media Save
Automatic paper saving layout. Con-
tinuous data is rotated clockwise so that
paper feeding rate is minimized. The
image data is printed to the left end of
the paper.
• Best
Automatic layout for selected standard
size. Continuous data is rotated clock-
wise so that paper feeding is minimized.
The image data is arranged at the center
of the minimum standard size to allow
the data to fit, and printed to the left end
on the paper.
b. Scale
Magnification can be changed automati-
cally, or can be specified.
[Default: 100%]
• Auto (cut sheet only)
The magnification changes to fit the cut
sheet loaded.
• 1-999%
Printing can be expanded or contracted
in steps of 1%.