Canon BJ-W3000, Руководство по обслуживанию

Страница: 151 / 268

CHAPTER 3. MECHANICAL SYSTEM
3–26
3. Installing the platen
1) Tighten screw [11] ([7] on the A1 size
model) temporarily.
2) Adjust the platen position so that the
screw hole [1] is aligned with the platen
hole and fix screw [1].
3) Fasten the screws from [2] to [14] ([2] to
[8] on the A1 size model) firmly in order.
4) Loosen screws [1] and [2], and lift up the
platen once while holding it at positions
[A] and [B] (to eliminate warp).
5) Fix screw [1] .
6) Fix screw [2].
7) Fix screw [15] and [16] ([9] and [10] on
the A1 size model).
< A0 size model >
Top view of platen
< A1 size model >
Top view of platen
CAUTION
In order to keep the platen flat, be sure
to install the platen using the sequence
given above.
Figure 3-407
[14] [12] [10] [8] [6] [4] [2] [16]
[B]
[A]
[B]
[A]
Home positon side
Home positon side
[13]
[8] [6] [4] [2]
[7] [5] [3] [1]
[9]
[10]
[11] [9] [7] [5] [3] [1]
[15]