Canon BJ-W3000, Руководство по обслуживанию

Страница: 30 / 268

CHAPTER 1. GENERAL DESCRIPTION
1–17
• HP RTL
Should only be used when printing
raster data. After the raster data is
received and 1 band is analyzed, print-
ing is started.
• HP-GL (759x)
Conforms to the HP-759X series
format.
[9] Pen Setup
Composed of the pen setup selection
menu, pen table changing menu, and pen
table initialization menu.
a. Select Table
[Default: Software]
Specifies whether to use the setting desig-
nated by the software or the pen table setting.
• Software
Pen setup from the application is
used. (See Table 1-305.)
• Pen Table (1 to 3)
Pen setup (pen table) stored in the
printer can be used. (See Table 1-304.)
CAUTION
In the draft mode, the ink may not
dry, depending on the environment.
Set the drying time as required.
REFERENCE
Drying time for each media type is as
follows:
• Plain paper: 30 sec.
• Coated paper: none
• Tracing paper: 2 min.
• Film: 7 sec.
[8] Emulation
[Default: Auto Sense]
Emulation can be set to match the file type
output from the computer.
• Auto Sense
HP-GL/2+RTL, HP RTL, HP-GL, and
TIFF data is automatically detected and
printed.
• HP-GL/2+RTL
Emulates HP-GL/2 and HP-RTL. Data
is accumulated in the memory buffer
and printing is started with the EOP
command, or when the EOP timer times
out.