2-8
Chapter 2 Handling
IMPORTANT
Up to 50 sheets of ordinary paper can be loaded into the
document feed tray. When placing the document, make sure the
size of stack does not exceed the loading marks on the
document guides.
❏
Placing a Card
When you want to scan a card, follow the procedure below
to place the card.
1.
Move the feed selection lever upward (bypass
feeding).
IMPORTANT
When scanning cards, set the feed selection lever to bypass
feeding and make sure to scan the cards one at a time.
2.
Adjust the document guides to match the width of the
card.
3.
Place the card face down in the landscape orientation
with the top edge at the bottom of the tray.
CAUTION
• A card placed into the document feed tray in the portrait
orientation may not be output properly because a load is
placed on it during feeding. Furthermore, removing a card that
has caused a feeding error may damage the card, so make
sure to correctly insert the card.
• Pull the lock lever and open the panel unit before removing a
placed card. Inserting a finger into the scanner while the panel
unit is closed may result in an injury.
Loading mark
Lock lever
