Canon 1750, Руководство по копированию

Страница: 34 / 106

Selecting the Paper Size 2-7
Ba
sic
Co
p
y
ing
F
e
at
ur
es
2
●
If you want to select a nonstandard paper size:
IMPORTANT
•
An underbar (_) must be entered between integer and fraction.
•
The following modes are not available for nonstandard size paper:
Collate, Group, Staple, 1 to 2-Sided, 2 to 2-Sided, Image Combination,
or ID Card Copy.
NOTE
•
If you make a mistake when entering values, press [C] (Clear)
➞
enter the
correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use - (numeric keys)
and (Clear) on the control panel.
•
You can store up to two sets of frequently used sizes. Press [Store/Edit]
➞
[Size 1] or [Size 2]
➞
enter the value for <X> and <Y>
➞
press [OK].
•
To recall the stored size, press [Size 1] or [Size 2]
➞
press [OK] and proceed to
the next step to specify the paper type.
❑
Press [Irreg. Size].
❑
Press [X]
➞
enter the length along the
horizontal axis of the paper using the
numeric keys.
The horizontal length can be set
between 5 9/16" and 24 3/4" (140 mm
and 630 mm).
❑
Press [Y]
➞
enter the length along the
vertical axis of the paper using the
numeric keys.
The vertical length can be set between
3 15/16" and 8 1/2" (99 mm and
216 mm).
❑
Press [OK].