Canon 1750 Скачать руководство пользователя страница 76

Страница: 76 / 106

Copying Different Size Originals Together (Different Size Originals)

3-21

anced

ing

The combination of the original's sizes available for the Different Size Originals
mode is LTR and LGL.

IMPORTANT

•

The combinations other than described above may wrinkle originals.

•

Make sure that the different sized originals are of the same weight (paper type).

•

If the Different Size Originals mode is set, the scanning speed may be slower than
normal.

•

The Different Size Originals mode cannot be used with the Image Combination, Frame
Erase, or ID Card Copy modes.

NOTE

If the Different Size Originals mode is used with the 1 to 2-Sided mode and the
originals for the front and back sides of a two-sided copy are different in size, the
copies are output as one-sided copies on paper of their respective sizes.

Place your originals into the
feeder.

Align the top and bottom edges of the
originals with the edges of the feeder by
adjusting the slide guides.

Press [Special Features]

➞

[Different Size Originals].

Содержание 1750











































































































Результаты поиска

Содержание 1750

Отзывы:

Похожие инструкции для 1750

Бренды по названию

Популярные бренды

Canon 1750, Руководство по копированию

Результаты поиска

Содержание 1750

Отзывы:

Похожие инструкции для 1750

Бренды по названию

Популярные бренды