© 2001 Cannondale Corporation - All Rights Reserved
34
X440s Owner's Manual.fm
REAR FENDER
1.
Remove the seat and the bolts (1).
2. Remove the fender nut and the rear fender.
3. To install, place the panel in the original position and
install the bolts.
TORQUE : Panel, rear fender bolts
5.0 lbf•ft (6.8 N•m)
GLIDE PLATE
1.
Secure the vehicle in a wheel vice.
2. Remove the bolts, nuts, and glide plate (1).
NOTE : To prevent the nuts from spinning, hold them with a
thin-blade screwdriver while removing the bolts.
The nuts are not secured within frame rails. Be careful not to
lose them.
3. To install, place the panel in the original position and
install the bolts.
TORQUE : Panel, glide plate bolts
5.0 lbf•ft (6.8 N•m)
1.
Bolts
1.
Fender nuts
2.
Rear fender
1
1
1
2
1
(12V+)
JUMP START
TERMINAL!
1.
Glide plate
1
1
