Printed : 8/13/01
53
P/N 951-05002032
DRIVE CHAIN ROLLERS
SERVICE : Drive, chain rollers, diameter, standard
1.4 inches (35.2 mm)
SERVICE : Drive, chain rollers diameter, minimum
1.3 inches (32 mm)
Inspect the upper and lower drive chain rollers for cracks,
wear, or other damage. Replace the drive chain roller with a
new one if the outside diameter (a) is out of specification.
CHECKING THE REAR END
Before every ride, check the rear end for worn or loose
swingarm bearings.
Place the vehicle on a stand so the rear wheel is off the
ground.
Hold each side of the swingarm and try to move it from side-
to-side. If any freeplay is felt, contact an authorized
Cannondale motorsports dealer for servicing.
1.
Upper drive chain roller
a. Outside
diameter
1.
Lower drive chain roller
a. Outside
diameter
a
1
a
1
WARNING
POTENTIAL HAZARD
Riding this vehicle with worn or loose swingarm
bearings
WHAT CAN HAPPEN
You can lose control of the vehicle resulting in
serious injury or death.
HOW TO AVOID THE HAZARD
Always check the condition of the swingarm
bearings before each ride.
