© 2001 Cannondale Corporation - All Rights Reserved
72
X440s Owner's Manual.fm
STATIC SAG
SERVICE : Suspension, front static sag, 25-35mm
SERVICE : Suspension, rear static sag, 25-35mm
MEASURING THE FRONT STATIC SAG
Static sag is the amount the suspension sags without the
rider on the vehicle.
CAUTION
If the front static sag is out of the specified range,
the spring preload must be changed. Changing the
spring preload should be left to an authorized Can-
nondale motorsports dealer.
NOTE : Measure from the axle to the same point on the
upper triple clamp each time.
SETTING THE REAR STATIC SAG
1.
Place on stand and measure (a) with no rider.
2. Remove stand and measure height (b) with rider.
3. Calculate
(a
-
b
=
static
sag).
NOTE : Measure from the axle to the same point on the
rear fender each time.
4. If the sag is out of the specified range. The rear spring
must be changed.
a. Measurement
on
stand
b.
Measurement without stand
a
b
a - b = rear static sag
a
b
