20
137384
English
Scalpel - Owner’s Manual Supplement
e. Confirm the chain guide is operating
properly by pulling the chain towards the
outside of the bike, attempting to derail
the chain, while pedaling it forward (by
hand) in the work stand. The chain should
not come off of the guide. If the chain
does come off of the guide, slightly lower
the guide until it does not.
CNG-5
f. Confirm the chain guide does not rub
while the rider is pedaling the bike in the
largest cassette cog, with the correct sag
at the shock (sag at the shock is 10mm).
If the guide rubs on the chain when sag
is set, the angle of the back plate can be
rotated forward another 5 to 10 degrees.
You are able to rotate the angle of the
back plate forwards another 5 to 10
degrees.
Keep fingers away from chain ring.
Large Chainring
Small Chainring
CNG-5
Chain guide rotation
When removing the main pivot or if the chain
guide rotates while riding:
1. Remove the main pivot bolt, clean the
threads and reapply Loctite 243 thread-
locker.
2. Reassemble the main pivot bolt and
chainguide and torque to 15-20 N-m
3. Allow the threadlocker to dry according to
manufacturer‘s recommended time.“
Содержание Scalpel
Страница 29: ...27 137384 English 1 5 N m No Loctite 7 1 2 3 5 6 4 b Latch a 5 c d 8 grease...
Страница 33: ...English...