Cannondale Scalpel, Дополнение к руководству пользователя

Страница: 30 / 34

28 137384
English Scalpel - Owner’s Manual Supplement
1.5 N·m
Torque this side only.
No Loctite
G
N
T
I
H
For use with dropper post
spec frames only.
Tubing length 650 mm
Not on size SM
8
N·m
E
E
F
A
B
C
D
L
V
J
U
Notes:
1. Internal cable routing should start from rear of frame
2. Rear triangle uses tube in tube construction
3. As needed, replace all bearings in assemblies as full compliment bearings (do not re-use)
4. Lightly grease all bearing before press fit
5. Lightly grease under all counter-sink bolt heads
6. First assembled with bolts using pre-applied NYLOK blue patch.
After removal, check patch material. If necessary, clean off residue, clean threads
and re- apply medium-strength thread locker (e.g. Loctite™ 242 (blue).
Apply 180 degrees of bolt diameter.
2
5
N·m
2
5 N·m
2
7 N·m
2
2-3 N·m
2
15-20 N·m
2
15 N·m
M12x1.0P
S
R 2X
2X
R
2X
Q
2X
2X
Q
K
M
O
P
Q
Q
????
Optional
or
2X
grease
2-3 N·m
S
W
2X
REPLACEMENT PARTS
ID Part Number Description
A K33001 Derailleur Hanger TA ST SS 078
B K83061
Speed Release TA 148x12 176 mm M12x1.0P
C K32011 Cable Funnel Tubing and Tie
D K32001 Cable Funnel w/ Bolt
E K34001 CS Flex Covers NDS and DS
F K34021 SS Inboard Frame Protector
G K34031 HT Rub Guard Clear Protectors
H K32021 DT Blank Cable Guide
I K32031 DT Tool Cable Guide w/ CO2 Retainers
J K91001 Scalpel Shock Bolt Upper
K K91011 Scalpel Shock Reducer Lower
L K34011 Scalpel Link Covers Right and Left
Notes:
1. Internal cable routing should start from rear of frame
2. Rear triangle uses tube in tube construction
3. As needed, replace all bearings in assemblies as full compliment bearings (do not re-use)
4. Lightly grease all bearing before press fit
5. Lightly grease under all counter-sink bolt heads
6. First assembled with bolts using pre-applied NYLOK blue patch. After removal, check
patch material. If necessary, clean off residue, clean threads and re- apply medium-strength
thread locker (e.g. Loctite™ 242 or 243 (blue). Apply 180 degrees of bolt diameter.