background image

16

MAINTENANCE

The following table lists only supplemental maintenance items.  Please consult your 

Cannondale Bicycle Owner’s Manual 

for 

more information on basic bike maintenance.  Consult with your Cannondale Dealer to create a complete maintenance program 
for your riding style, components, and conditions of use.    Follow the maintenance recommendations given by the component 
manufacturers for the various non-Cannondale parts of your bike.

WHAT TO DO

HOW OFTEN

APPLY FRAME PROTECTION: 

DOWNTUBE 

 -  A clear protective material is applied to carbon version of this bike.  

The material protects the downtube from damage caused by small debris.  Have it 
replaced if it  becomes damaged or is missing.  

See page 7.

CHAINPLATE

 -  Check the chain plate located on the drive side chainstay behind 

the chainrings.  Replace it with a new one if it is missing or damaged.  

See page 7.

HOUSING AND CABLES

  - Your bike has been supplied with  small adhesive frame 

protectors.     Place this material on the  the frame between where cables and 
housing rub due to movement.   Overtime, cable rubbing  can wear into the frame 
itself causing very serious frame damage.  

See pages 7 and 9.

 

CHAINSTAY 

-  A clear adhesive chain slap protector has been placed on the right 

chainstay of the swingarm.   Replace this protector if it becomes damaged.  

See 

pages 7 and 9.

NOTE:

   Damage to your bike caused by cable rubbing is not a condition covered under 

your warranty.   Also, adhesive frame guards are not a  fix for incorrectly installed or 
routed cables or lines.  If you find that applied guards are wearing out very quickly, 
consult with your Cannondale Dealer about the routing on your bike.  

AFTER FIRST RIDE

&

EVERY FEW RIDES

INSPECT THE FRAME, CHAINSTSAY, SEATSTAYS 

 - Clean and visually inspect 

entire bike frame/  assembly for cracks or damage.  

See “Inspect For Safety” in your 

Cannondale Bicycle Owner’s Manual.

BEFORE AND AFTER EACH RIDE

WARNING

ANY PART OF A POORLY MAINTAINED BIKE CAN BREAK OR MALFUNCTION LEADING TO AN ACCIDENT WHERE YOU 
CAN BE KILLED, SEVERELY INJURED OR PARALYZED. 

 Please ask your Cannondale Dealer to help you develop a complete 

maintenance program, a program which includes a  list of the parts on your bike for YOU to check regularly.   Frequent checks 
are necessary to identify the problems that can lead  to an accident.  

Содержание FLASH 2010





















Отзывы: