12
d.
Continue to bury your perimeter (boundary) wire around your property
until you reach the twisted pair where you started. The below section will
describe how to connect the wires together in compliance with Invisible
Fence
®
Brand Standards.
Connecting your Invisible Fence
®
Brand wires
Where your twisted pair and the perimeter (boundary) wires meet, they must be
connected in the proper fashion to ensure the signal makes the loop around the property.
The picture below represents the two sides of the twisted pair; each should be connected to
the perimeter (boundary) wire using the included wire nuts and direct burial splices.
1.
Strip about 1 ½ inches of insulation of the end of each wire. Twist the exposed
strands on the end of each wire together to hold them together.
2.
Bend the end of each wire to form an L. Twist the end of the first wire around the
end of the second wire once in a clockwise direction. Then twist the end of the
second wire around the first wire once in the opposite direction.
Where Twisted meets Perimeter wire
