Candy FP 855/1, Инструкция по установке и использованию, Страница: 6 / 28

6
1 - ELECTRICAL CONNECTION
THE ELECTRICAL CONNECTION SHOULD BE CARRIED OUT BY AN APPROVED
CONTRACTOR OR TECHNICIAN WITH SIMILAR QUALIFICATIONS.
The installation receiving the appliance must comply with the standard in force in the
installation country.
CANDY does not accept any responsibility if this provision is not complied with.
Connection to the network must be by earthed socket outlet, or by means of a multi-pole
circuit-breaker having a distance between contacts of at least 3 mm.
The installation must be protected by suitable fuses, and have wires with a large
enough cross-section to supply the oven normally.
CONNECTION:
The oven is fitted with a power lead for connecting exclusively to a voltage of 230 V AC
across the phases or across phase and neutral.
Connection must be carried out in compliance with the diagram on the next page,
having first checked:
. the supply voltage indicated on the meter,
. the circuit-breaker setting.
The lead protection wire (green/yellow) connected to the earth terminal of the oven must be
connected to the earth terminal of the installation.
Caution:
. Have the earth continuity of the installation checked by an electrician
before making the connection.
. The manufacturer will not be liable for any incident, or the possible
consequences that may arise from the use of the oven not earthed, or
connected to an earth with defective continuity.
NB: do not forget that the oven may require after-sales service.
Also, locate the socket outlet so that the oven can be connected once it is removed
from its space.
Power supply cable: if the power supply cable has to be changed, please have this
done by the after-sales service or by someone with similar qualifications.