C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 31 / 44

EDP Commands 27
4.2 Parameter Setting Commands
The following table describes EDP parameter setting commands with descriptions and ranges.
Command Choices Description
DAISY OFF
PORT 1
PORT 2
PORT 3
PORT 4
This is the port that will echo the weight data to another remote display
DIO1 OFF
REDLED
GRNLED
ZERO
TARE
UNITS
PRINT
GRSNET
Select which LED or front panel key function is controlled by this digital I/O
point. Note: DIO1 and DIO2 could both be set to the same front panel key
function.
DIO2 OFF
REDLED
GRNLED
ZERO
TARE
UNITS
PRINT
GRSNET
Select which LED or front panel key function is controlled by this digital I/O
point. Note: DIO1 and DIO2 could both be set to the same front panel key
function.
HOLDWEIGHT OFF
ON
Holds the last received weight on the display instead of showing an error if
communications are lost or the host is sending demand data.
HOST PORT 2
PORT 1
PORT 3
PORT 4
The port to receive weight data from the indicator on.
INTENSITY 7
1
2
3
4
5
6
The intensity of the LED elements with 1 = dimmest and 7 = brightest
KEYDST PORT 2
OFF
PORT 1
PORT 3
PORT 4
This is the port that will transmit keypress commands.
LOCK OFF
ON
Locks (on) or unlocks (off) access to the Learn Mode.
NODATA NO COM
BLANK
This parameter allows the display to either display NO COM or go blank when
data transmission is lost, unless over-ridden by the hold weight parameter.
STANDSTILL OFF
ON
Select On to blank the display when the scale is in motion.
STARTUP ON
OFF
This defines whether or not to do a display check and version display on power
up.
On = this performs the test and shows the version
Off = this goes straight into the operation
SUPPRESSZERO ON
OFF
Enable (on) or disable (off) leading zero suppression.
Table 4-2. Laser LT Parameter Setting Descriptions