C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 23 / 44

Table 3-6. Keypress Parameter Settings
Label Default Description
KEYPAD 1 Zero ENABLE = ON
STRING = KZERO<13> Keypad strings are captured using the
following format for all 5 keys:
KEYPAD1.STRING = <KZERO<13>
KZERO is a string which can be up to 32
characters
<13> is the ASCII for carriage return.
KEYPAD 2 G/N ENABLE = ON
STRING = KGROSSNET<13>
KEYPAD 3 Tare ENABLE = ON
STRING = KTARE<13>
KEYPAD 4 Units ENABLE = ON
STRING = KUNITS<13>
KEYPAD 5 Print ENABLE = ON
STRING = KPRINT<13>
Configuration 19
3.6 Digital I/O
When enabled, the digital inputs control the Red/Green light status LEDs or the front panel keypress as shown in
Figure 3-9. See J1 in Table 2-1 for wiring.
CONFIG
SERIAL
TEST
VERS
DIO1 DIO2
DIGIO
KEYPAD
OFF
ZERO
REDLED
GRNLED
REDLED
GRNLED ZERO
OFF
GRSNET
TARE
UNITS
PRINT
GRSNET
TARE
UNITS
PRINT
Figure 3-9. Digital I/O Menu
Table 3-7. Digital I/O Descriptions
Digital I/O Logic Status
DIO1 0 - GND Active
1 (+ 5V) Inactive
DIO2 0 - GND Active
1 (+5V) Inactive
3.7 Version
When
Version
is selected from the main menu choices (Figure 3-10), the current software version is shown on the
remote display.
CONFIG
SERIAL
TEST KEYPAD
VERSION
DIGIO VERS
Figure 3-10. Version Menu