C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 17 / 44

Configuration 13
3.2 Manual Configuration
To begin configuration, open the enclosure to access the CPU board (Figure 3-2).
Setup
Button
Figure 3-2. Laser LT CPU Board
The setup button is located on the CPU board (Figure 3-2).This allows access into Configuration Mode.
Press the
SETUP
button to access main menu configuration parameters.
The Laser LT remote display can be configured using a series of menus accessed from the front panel of the unit as
shown in Figure 3-3.
G/N
B/N
ZERO PRINT UNITS
UNITS
TARE
Figure 3-3. Configuration Setup Buttons
Use the
UP/DOWN, LEFT/RIGHT
buttons to navigate through menu items and the
ENTER
button for setting a
selection.
Table 3-1 summarizes the functions of each of the main menus and Figure 3-4 illustrates the main menu selections.
Table 3-1. Laser LT Remote Display Menu Summary
Menu Menu Function Table/Section Number
CONFIG Configuration. Displays brightness and other parameters associated with configuring
the remote display Table 3-2
SERIAL Serial. Configures serial ports Table 3-3 and 3-4
TEST Test. System hardware tests Table 3-5
KEYPAD Keypad. Configures keypad operation and allows the strings sent with each keypad
press to be modified to comply with other manufacterers Section 3.5
DIGIO Digitial I/O. Assigns digital input functions Section 3.6
VERS Version. Displays installed software version number Section 3.7