C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 15 / 44

Installation and Setup 11
2.3.6 Commport Jumper
The com port jumper (shown in Figure 2-7, upper right hand corner) is used when an option card is plugged into J7
on the CPU board (see Figure 2-9 for the J7 location). Available option boards include:
• Fiber optic board - accessed Port 3
• RS-232/422 board - accessed Port 3
• Ethernet TCP/IP board - accessed Port 3
• USB board - accessed Port 3
• Ethernet wireless - accessed Port 4
If using one of the listed option boards, the commport jumper setting must be moved to the right.
Move jumper
t o t h e r i g h t
when using an
option card.
H e a r t b e a t
display
Figure 2-8. Commport Jumper Location
Option card seated
onto J7 of the CPU
board of Laser LT
Figure 2-9. Option Board Location on the CPU Board