C&S Controls Laser LT RD-1550, Техническое руководство

Страница: 19 / 44

Configuration 15
NO DATA No Com
Blank
Selects what to display when the
Laser LT
is not receiving recognizable data - “NO COM” or
blank screen.
LOCK Off
On Select On to make sure the current settings don’t get changed and to disable Auto-Learn.
When off, the system enables Auto-Learn.
S CHAR STX
CR
SOH
LF
FF
ETX
The
Laser LT
scans for this character to determine the start of a packet.
E CHAR CR
LF
FF
ETX
The
Laser LT
scans for this character to determine the end of a packet.
LW POS 000000 Defines the position of the last character in a weight. Range 0-63 with 0 as the default.
• With a 0 setting, the
Laser LT
will search from the end of the data stream for the first
group of digits.
• With a non-zero setting, the
Laser LT
will begin searching for digits at the specified
location.
• If LWPOS is past the weight in the data stream, it will work its way back to the first group of
digits it finds.
• A custom setting of this parameter is how a particular value is displayed from a
multi-weight data stream.
SUPP O On
Off
Enable (on) or disable (off) leading zero suppression.
PRI CHR L = 76 Allows the user the select the primary unit character
PRI LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
SEC CHR K - 75 Allows the user to select the secondary unit character
SEC LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
GRS CHR G - 71 Allows the user to select the gross character
GRS LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
NET CHR N - 78 Allows the user to select the net character
NET LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
MOT CHR M - 77 Allows the user to select the motion status character
MOT LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
NEG CHR [-] 45 Allows the user to select the negative polarity status character.
NEG LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
OVR CHR O - 79 Allows the user to select the overload status character.
OVR LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
COZ CHR Z - 90 Allows the user to select the center of zero status character
COZ LOC 000000
This is the character location in the string format. A 0 (zero) indicates that the
Laser LT
will
look for the character anywhere in the incoming data. The range is 0-63
CONFIG Menu
Table 3-2. Configuration Menu Summary - Level 2