Canary pro II, Руководство пользователя

Страница: 3 / 19

4 5
Reset Mode
1 7
10
12
13
11
8
6
8
2
3
3
4
5
7. The unit is active when
flashing
8. Unit of measurement: Bq/m³
9. USB connection
10. ‘RESET’. Used to start a new
measurement period.
11. ‘MODE’. Displays the number
of days measured since the
previous reset in section 5
on the display.
12. Battery compartment for 3 x
LR03, alkaline AAA batteries
13. Opening the battery cover
1. Indicator for low battery level.
Replace batteries when lit.
2. ‘LONG TERM AVERAGE’
measurement mode
3. Measured value
4. ‘SHORT TERM AVERAGE’
measurement mode
5. Measurement period for short
term average. Alternates
between 1 and 7 days
6. Indicator for USB connection
to PC
KEY TO FiGURE
SAFETY
Contact the seller if the product requires service or repairs. The
front or back cover must not be opened.
Avoid subjecting the unit to shock, impact, pressure, vibra-
tions, dust and moisture. Condensation can occur if the unit
is moved from a location with high atmospheric humidity to a
cold location. If condensation occurs, remove the batteries and
leave the unit in a dry environment for 2 hours. The unit must
not be exposed to direct sunlight for extended periods. The
unit must be stored under dry conditions, if possible together
with a desiccant such as silica gel.
Use only batteries of type LR3, alkaline AAA batteries. The
batteries must not be exposed to fire or other extreme heat.
The battery terminals must not be touched, and they must be
kept free from dust, sand, liquids and other foreign objects.
LiFETiME
The monitor is tested and quality assured at production. It
meets the accuracy specified in the specification table, un-
less it is continuously measured at high radon levels (many
thousand Bq/ m³) over years. We recommend that the unit is
left on all the times.
GETTiNG STARTED
• Insert the supplied batteries. Please observe correct polarity
of your batteries and make sure you install them in the correct
orientation as adviced by the marking in the bottom of the
battery compartment. Measurement will start automatically
after about 3 minutes. This is indicated by a flashing measure-
ment indicator at the top right of the screen
The menu options may differ from what is illustrated in this user guide.
ENGL
iSH
9