6. Normal operation
6. Normal operation
This function is used to select the grid reference standard (see Figure 6.16).
YES=<ENT> NO=<ESC>
Standard:AUS-Q-0.8
Figure 6.16
6.7.1 Selecting Standard
6.7 Advanced Settings - Technicians Only
Select Advanced Settings from the Main Menu to access the following options:
1.
Select Standard
2.
Grid ON/OFF
3.
Clear Energy
4.
New Password
5.
Power Control
6.
Calibrate Energy
7.
Special Settings
8.
STD. Mode Settings
9.
Restore Settings
10.
Updater
11.
Restart HMI
12.
Debug Parameter
13.
Fan test
14.
Power Parameter
NOTE:
Access to this area is for fully qualified and accredited technicians only.
Please follow 7.4 to enter password to access this menu.
Selecting the “User-Def” menu will access the following sub-menu (see Figure 6.17).
Figure 6.17
OV-G-V1: 260V
OV-G-V1-T: 1S
Below is the range for each setting for use in the User-Def function. You may change the limit
manually thus creating a custom grid profile by using this function.
CSI-50KTL-GS-FL / CSI-50KTL-GS
/ CSI-60KTL-GS
/ CSI-66KTL-GS
B
-B
-B
-B
OV-G-V1:
236---335V
OV-G-V1-T: 0.1---9S
OV-G-V2:
248---341V
OV-G-V2-T: 0.1---1S
UN-G-V1:
173---236V
UN-G-V1-T: 0.1---9S
UN-G-V2:
132---219V
UN-G-V2-T: 0.1---1S
OV-G-F1: 60.2-63Hz
OV-G-F1-T: 0.1---9S
OV-G-F2: 61-63Hz
OV-G-F2-T: 0.1---9S
UN-G-F1: 57-59.5Hz
UN-G-F1-T: 0.1---9S
UN-G-F2: 57-59Hz
UN-G-F2-T: 0.1---9S
Table 6.2 Setting ranges for User-Def
NOTES
The initial value of the User-Def standard is for reference only. It does
not represent a correct value suitable for use.
.47.
.46.
Table 6.3 Baseline Inverter Settings
Setting
value
UL-480(480rated)
Vup-Limit1
523
<V<571
Time1
0 6S
.
Vup-Limit2
V
≥
571
Time2
0 12S
.
Vdw-Limit1
243
≤
V<427
Time1
1.2S
Vdw-Limit2
V<240
Time2
0 08S
.
Fup-Limit1
F
＞
.
Hz
60 5
Time1
0 12S
.
Fup-Limit2
NA
Time2
Fdw-Limit1
f<59
.
3
Hz
Time1
0 12
.
Fdw-Limit2
Time2
NA
NA
NA
