SETUP
NOTICE
During data transfer, make sure that:
– Voltage (12V) remains stable before starting
update. Charge the battery or use a power
pack to ensure sufficient power reserve for
the procedure.
– Although the screen may ''freeze'' for a
while, B.U.D.S. continues to function in the
background.
– Never disconnect any cable while updating
the ECM.
MANDATORY TOOLS
A personal computer (laptop or desktop)
MPI-2 INTERFACE CARD
(P/N 529 036 018)
MPI-2 DIAGNOSTIC CABLE
(P/N 710 000 851)
OPTIONAL TOOL
Extension cable
available at electronic retail outlets.
Do not exceed 7.5 m (25 ft)
B.U.D.S. can be used to
– Enter Customer's Name
– Reset Trip Hours and Trip Distances
– Reset Last Service
– Setting Units of Display
– Check fault codes (if any)
– Program keys.
Connecting PC to Vehicle
1. Remove RH service cover from vehicle.
2. Connect the PC to vehicle. Refer to the latest
edition of
CAN-AM ROADSTER B.U.D.S. SOFT-
WARE AND COMMUNICATION TOOLS
for the
proper procedures.
3. Press READ DATA button from the tool bar to
initiate communication with the vehicle.
vmr2006-012-100_aen
Entering Customer's Name
1. Click on the VEHICLE tab to open the vehicle
information page.
rbl2013-002-023
TYPICAL
2. Type the name of the customer.
vbl2006-007-002
TYPICAL
3. Click on WRITE DATA to save the information
in the vehicle ECM.
NOTE:
After you are finished typing the name,
B.U.D.S. automatically updates the Delivery Date
on the screen.
Resetting Trip Hours and Trip Distances
1. Ensure that the VEHICLE tab is selected.
2. Click on the RESET TRIP buttons to reset the
information.
PREDELIVERY
2014-1
49 / 52