PARTS TO BE INSTALLED
rbl2014-004-062_a
LEFT SIDE STORAGE COVER, RIGHT SIDE SIMILAR
1. Turn signal light assembly
2. Light holder
3. Plastic retaining washer
4. Metal flat washer
5. Retaining nut
6. LH signal light wiring and connectors
7. Outer storage cover
rbl2014-004-063_a
RETAINING WASHER POSITIONING
1. Retaining washer alignment key
2. Alignment key in outer storage cover
SIGNAL LIGHT NUT TIGHTENING TORQUE
Retaining nut
2.4 N•m (21 lbf•
in
)
rbl2014-004-070_a
SIGNAL LIGHT INSTALLED ON OUTER COVER
1. LH outer storage cover
2. Signal light
3. Plastic retaining washer
4. Metal flat washer
5. Retaining nut
rbl2014-004-064_a
STORAGE COVER ASSEMBLY
1. Outer cover
2. Signal light wiring passed through hole
3. Inner cover
4. Retaining screws (x6)
5. Storage cover retention cable
TIGHTENING TORQUE
Storage cover retaining
screws (x6)
2.5 N•m ± 0.5 N•m
(22 lbf•
in
± 4 lbf•
in
)
3. Insert signal light wiring through hole in storage
compartment side and install parts as in follow-
ing illustrations.
NOTE:
Route wiring and locking tie as in illustra-
tion to prevent wiring from being pinched by cover
when closed.
32 / 52
2014-1
PREDELIVERY
