PARTS TO BE INSTALLED
NOTE:
Be very careful not to break panel tab when
removing metal clip.
rbl2014-004-041_a
LH AIR DUCT TRIM PANEL (LOW BEAM HEADLIGHT TRIM
PANEL ON CE MODELS)
1. Trim panel
2. Metal retaining clip to remove from inside panel
22. Ensure both caged nuts are installed in lower
fixation holes of front cargo module.
rbl2014-004-015_a
1. Caged nuts installed here
23. Remove radiator protectors installed for ship-
ping.
rbl2014-004-043_a
1. Radiator protectors to remove
NOTICE
Radiator
protectors
must
be
re-
moved before installation of front cargo mod-
ule or engine overheat will occur during engine
operation. Care must be taken not to damage
radiators once protectors are removed.
24. Insert hose clamp from PDI kit onto air inlet
duct in cargo module as per following illustra-
tion.
rbl2014-004-018_a
1. Front cargo module
2. Air inlet duct
3. Clamp orientation, screw facing out towards wheel
NOTE:
Spray a solution of water and mild soap in-
side the inlet duct mating surface to aid in the in-
stallation of the duct.
25. Turn up and store all the wiring and connectors
on cargo module to prevent them from being
pinched between the front cargo module and
front frame.
NOTE:
On models with separate low beam head-
lights, pay attention to the routing of the adjuster
cables for the low beam headlights when in-
stalling the front cargo module.
18 / 52
2014-1
PREDELIVERY
