PARTS TO BE INSTALLED
rbl2014-004-017_a
AIR INLET DUCT CONNECTION
1. Primary air intake silencer
2. Air inlet duct alignment key
3. Hose clamp position
SPECIFIED TORQUE
Hose clamp
1.5 N•m ± .5 N•m
(13 lbf•
in
± 4 lbf•
in
)
31. Obtain the following hardware from PDI kit to
install front cargo module on vehicle.
rbl2014-004-010_a
TYPICAL
1. Black M6 x 20 hexagonal forming screws from PDI kit
2. Gold colored M6 x 20 hexagonal flange screws from PDI kit
32. Install 2 gold colored M6 hexagonal flange
screws to secure bottom of storage compart-
ment. Do not tighten yet.
rmr2010-038-026_a
1. Gold M6 screws
33. Install 4 black M6 hexagonal forming screws
to secure top of storage compartment.
rmr2010-038-025_a
1. Black M6 screws
34. Torque upper and lower M6 hexagonal screws
as specified.
SPECIFIED TORQUE
M6 X 20 hexagonal
forming screws (4)
4.5 N•m ± .5 N•m
(40 lbf•
in
± 4 lbf•
in
)
M6 X 12 hexagonal
flanged screws (2)
10 N•m ± 2 N•m
(89 lbf•
in
± 18 lbf•
in
)
35. Cut locking ties securing connectors near LH
and RH sides of cargo module.
20 / 52
2014-1
PREDELIVERY
