PROBLEMS
2. Remove the bulb by pushing in and
turning counterclockwise.
3. Install the new bulb by pushing and
turning it clockwise.
4. Reinstall the lens.
Tail Light/Brake Light
1. Remove the panel under the pas-
senger seat by unscrewing 7 Torx
screws as indicated below.
rmo2008-001-114_a
PANEL UNDER PASSENGER SEAT
1. 7 Torx screws location
2. Partially remove right rear side pan-
el by removing the 2 plastic rivets
under the seat as indicated below.
rmo2008-001-115_a
1. 2 plastic rivets under the seat
rmo2008-001-077_a
1. Flat head screwdriver under rivet head
2. Turn screwdriver 1/4 turn
rmo2008-001-078_a
1. Flat head screwdriver under rivet
2. Turn screwdriver 1/4 turn
3. Disconnect right turn signal hous-
ing connectors.
4. Remove the Torx screw behind the
lens as indicated below.
rmo2008-001-116_a
1. Removing Torx screw behind lens
5. Remove the Torx screw beside the
lens under the rear tip as indicated
below.
rmo2008-001-117_a
1. Removing Torx screw beside the lens
6. Turn the connector counterclock-
wise and remove from the lens.
98
______________________
Содержание spyder gs 2008
