Can-Am DS 450 2008, Руководство по ремонту

Страница: 210 / 401

Section 05 FUEL SYSTEM
Subsection 01 (ELECTRONIC FUEL INJECTION (EFI))
vmo2008-011-026_a
1. Vehicle serial number location
MFD. DATE FAB:
12/2003
2BPS1234X2V000123
1234
MODEL:
VIN / NIV:
MANUFACTURED BY:
FABRIQUÉ PAR:
MADE IN/FABRIQUÉ AU:
XXXXX
TYPE: ATV / VTT
2
1
vmo2008-011-094_a
TYPICAL — VEHICLE SERIAL NUMBER LABEL
1. V.I.N. (Vehicle Identification Number)
2. Model number
Record engine serial number.
vmo2008-011-026_b
TYPICAL — ENGINE SERIAL NUMBER LABEL
1. E.I.N. (Engine Identification Number)
Enter data into ECM as detailed in ENTERING THE
COLLECTED INFORMATION INTO THE ECM be-
low.
Entering the Collected Information
into the ECM
Use B.U.D.S. to enter the recorded data into the
new ECM.
In B.U.D.S., click the Read Data button to read the
new “empty” ECM.
vmr2006-012-100_aen
Go to the Vehicle tab and enter the information
you recorded previously.
– Vehicle (V.I.N.) number
– Engine number
NOTE: Do not enter the leading “M”.
– Model number
NOTE: Do not enter leading or trailing 0s (zeros).
– Customer.
Go to the Setting tab.
Reset the Closed Throttle and Idle Actuator .
Refer to
CLOSED THROTTLE RESET
above.
vmr2006-014-084_aen
Click on the Write Data button.
vmr2006-012-100_ben
Reinstall remaining removed parts.
Test run engine.
190
vmr2008-022