Camus ProtoNode Start-up Guide
Page 33 of 87
•
To add an active profile to support a device, click the Add button under the Active Profiles heading.
Select a profile from the drop-down menu field that appears underneath the Current profile column.
NOTE: If multiple devices are connected to the ProtoNode, set the BACnet Virtual Server Nodes
field to “Yes”; otherwise leave the field on the default “No” setting.
•
Once the Profile for the device has been selected from the drop-down list, enter the value of the
device’s Node-ID which was assigned in
•
Then press the “Submit” button to add the Profile to the list of devices to be configured.
•
Repeat this process until all the devices have been added.
•
Completed additions are listed under “Active profiles” as shown in
5.4 Verify Device Communications
•
Check that TX and RX LEDs
•
Confirm the software shows communication without errors (
).
Figure 20: Web Configurator Showing Available Profile Selection
Figure 21: Web Configurator Showing Active Profile Additions