Camus Hydronics ProtoNode FPC-N34, Руководство для стартапов, Страница: 29 / 87

Camus ProtoNode Start-up Guide
Page 29 of 87
4.9 Power-Up ProtoNode
Check power requirements in the table below:
Power Requirement for ProtoNode External Gateway
Current Draw Type
ProtoNode Family 12VDC/AC 24VDC/AC 30VDC
FPC – N34 (Typical) 170mA 100mA 80mA
FPC – N34 (Maximum) 240mA 140mA 100mA
FPC – N35 (Typical) 210mA 130mA 90mA
FPC – N35 (Maximum) 250mA 170mA 110mA
NOTE: These values are ‘nominal’ and a safety margin should be added to the power supply of
the host system. A safety margin of 25% is recommended.
Figure 16: Required Current Draw for the ProtoNode
Apply power to the ProtoNode as shown below in Figure 17 . Ensure that the power supply used complies
with the specifications provided in Appendix E.1 .
• ProtoNode accepts either 9-30VDC or 12-24VAC on pins 4 and 5.
• Frame GND should be connected.
Power to
ProtoNode
ProtoNode
Pin #
Pin
Assignment
Power In (+) Pin 4 V +
Power In (-) Pin 5 V -
Frame Ground Pin 6 FRAME GND
Figure 17: Power Connections