![background image](http://html1.mh-extra.com/html/campbell/rainvue-sdi-12-series/rainvue-sdi-12-series_product-manual_3912376030.webp)
6. If this is the first time connecting the RainVUE-series to the computer, click install USB
driver for the RainVUE before connecting the cable to the computer.
7. Use the supplied USB cable to connect the RainVUE-series USB port to a computer USB
port.
8. Select the Communication Port in the left panel. RAINVUE will appear in the selection
dialog.
NOTE:
It may take a few seconds for the Communication Port to become available for use after
physically connecting the RainVUE-series to the computer.
9. Click Connect.
10. To change the SDI-12 address, click the SDI-12 Address box, select a different value, then
click Apply.
11. Click the Status tab to view accumulation, tip counts, and intensity information.
RainVUE-Series SDI-12 Precipitation Sensors
20