![background image](http://html1.mh-extra.com/html/campbell/rainvue-sdi-12-series/rainvue-sdi-12-series_product-manual_3912376029.webp)
1. Loosen and remove the three base thumb screws then lift the funnel upward.
2. Use a Philips screwdriver to remove the four screws on the RainVUE-series interface.
3. Remove the interface cover to access the USB port.
4. Open
Device Configuration Utility
.
5. Type RainVUE-series in the Device Type box and click RainVUE-series.
RainVUE-Series SDI-12 Precipitation Sensors
19