![background image](http://html1.mh-extra.com/html/campbell/rainvue-sdi-12-series/rainvue-sdi-12-series_product-manual_3912376013.webp)
4. Click the Wiring tab. Click OK after wiring the sensor.
5. Repeat steps three and four for other sensors you want to measure. Click Next.
6. In Output Setup, type the scan rate, a Table Name, and Data Output Storage Interval. Click
Next.
NOTE:
Because of the delays using SDI-12, Campbell Scientific recommends measurement
scans of 10 seconds or more.
RainVUE-Series SDI-12 Precipitation Sensors
3