PConnectCE for the Allegro CE
11
Terminal
When the Terminal tab is selected, the remote communications command is
sent to the datalogger and it is put into a remote communications state. This
state allows the user to send telecommunications commands directly to the
datalogger and is typically used for trouble-shooting.
To return the datalogger to its program execution state, enter *0. LOG1, LOG2,
or LOG12 should be displayed indicating that the code in program table 1,
and/or program table 2, is running.
This option should be used with caution since it is possible to delete
instructions in the datalogger’s program or delete data from the datalogger
while in this mode. Refer to the datalogger’s user manual for complete
information on the remote communications mode.
Transfer Program
Switch to the Transfer Program tab to send a new program file (DLD) to the
datalogger, or receive the program file that is currently running in the
datalogger.
Browse DLD Files