PConnectCE for the Allegro CE
9
There are three data collection options:
x
Collect Since Last Time – This will collect only the new data that has been
stored since the last time data was collected using the Allegro CE. If this is
a first data collection attempt, all data will be collected.
x
Collect All – This will collect all data currently in datalogger memory,
regardless of whether the data has been collected previously.
x
Collect Last # of Records – This will collect only the number of records
entered into the adjacent field.
When the Allegro CE is synchronized with the PC and the data file is
transferred, the data will be appended to any data file that exists with the same
name. During the transfer, the data is converted to comma-separated ASCII
format. After the file is transferred, the binary file is deleted from the Allegro
CE.
Set Clock
The datalogger’s clock can be set to that of the Allegro CE by switching to the
Set Clock tab and touching the Set Clock button. Note that the two clocks may
not match exactly, since there will always be some time lag between when the
command is sent and when it is received by the datalogger.
