PConnectCE for the Allegro CE
13
As you scroll through the data, note that all of the collected arrays are displayed
intermixed as they were retrieved from the datalogger. To graph a column of
data, you must limit the display to only one array type. Tap the Array ID drop-
down arrow and select the ID of the array from which you want to graph data.
Double tap the column of interest to graph it. You can scroll back and forth
within the data. To see the value and the time stamp of a particular point, just
tap that point.
If an FSL file with the same name as the DLD file name exists on the handheld,
PConnectCE for the Allegro
will use the FSL to derive column labels, graph
labels, and time stamps when viewing the data. If an FSL with the same
program name does not exist,
PConnectCE for the Allegro
will prompt you to
select a file. To transfer an FSL file to the handheld, place the file in the
PConnectCE/
devicename
directory and the file will be copied during the next
synchronization operation.
A data file can be deleted from the handheld device by pressing the
Delete
button. You will be asked to confirm the deletion. A data file that has been
deleted will not be transferred when the handheld device is synchronized with
the computer, and it cannot be restored once deleted.
4.4 Viewing Datalogger Programs
If there were any program files (CSI or DLD) in the Allegro CE’s working
directory when you synchronized it with the PC, they will be transferred to the
Allegro CE. To see a list of the datalogger program files that are stored on the
Allegro CE, touch the letter P to display the Program window.
A list of available programs will be displayed on the left side of the window.
On the right side of the window, the date of the last time the program was
downloaded to the Allegro CE will be displayed. To view a program, simply
highlight the program name. The DLD code will be displayed; however, it
cannot be edited. To close the program, touch the OK.
Comma-Separated
View Button
Select Only
One Array
